12V Engine Ignition Timing Light Strobe Inductive Lamp Automotive Strobe Tester

Description

12V Engine Ignition Timing Light Strobe Inductive Lamp Automotive Strobe Tester
Description:
Design to re-timing your car's ignition to get the best performance that you can. Suitable for car, vehicle motorcycle, marine,all two-stroke and four-stroke gasoline engines, easily operate on 12V ignition systems.
Sensor Clips: The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. It's sliding clamp-on inductive pick-up, for easy and safe hookup.
Advance Function: Capable of testing the ignition timing scale on the engine flywheel or belt pulley intuitively to adjust appropriately.Able to detect the automotive knock suppression control system and vacuum advance angle control system, change its advance angle with the speed change.
Operating Instructions:
1.Clamp the inductive pick-up around the number one (1) spark plug wire. Make sure the arrow on it is facing towards the spark plug.
Do not allow the inductive pick-up to touch the exhaust manifold or surrounding parts as these areas become extremely hot and will damage the inductive pick-up.
2.Connect the RED clamp to the positive (+) battery terminal.
3.Connect the BLACK clamp to a secure engine ground such as the alternator bracket or the engine block. For safety reasons, do not use the negative (-) battery terminal or fuel system components as a ground connection point.
Specification:
Type: Engine Ignition Timing Light Tool
Material: ABS
Input voltage: 12V
Trigger point: high volt coil of No.1 spark plug
Speed: up to 10000rpm
Working temperature: 0-40℃
Speed: 200-10000r/min
Package Include:
1 * Ignition Timing Light