2020 2021 Ford Explorer Police Utility Spotlight Delete Hole Patch Gloss Black

Description

NennoPro
®
Large Windshield Post Spotlight Patch for Ford Explorer Police Interceptor Utility 2020 - 2021, and other applications (see dimensions below).
Was the spotlight removed from your 2020 or 2021 Explorer Utility SUV and left a gaping hole in the A-Pillar or windshield post?
The solution is finally here!
This custom molded Gloss Black rectangular self-adhesive Urethane spotlight delete hole patch fits the Left (drivers) or Right (passenger) windshield post.
No fillers or painting means no mess to clean up.
It installs in minutes.
Simply remove any burrs from the area and clean any residue with adhesive remover and apply the patch over the hole.
See the installation info below.
As an exact match and fit for the 20 and later Ford Explorer SUV Utility Police Interceptor, it can be used for other applications requiring a larger patch.
Dimensions:
4.250 inches High x 1.50 inches Wide x 0.060 inches thick
Looking for a different size?
Check our other items for our large round patch or our standard windshield post hole patches.
EZ Installation:
50 degrees minimum installation surface temperature.
Clean all metal burrs, wax, spent residue, RTV silicone and any other foreign substances around the hole to be covered.  Carefully peel the backing off the patch and center over your hole pressing down around the outer edges only.
Be sure to align it over all 3 holes with some margin and avoid the bend in the edge of the pillar closest to the windshield for best results.  Try to get it in the exact spot you need the first time, the adhesive is very strong and it will damage the adhesive if pulled off during install.
Some lifting on the edges may occur, press the edges down until the adhesive has fully bonded.
Avoid “touch” type car washes for 24 hours.
Thanks for looking!
Nennoguy
Nenno Products LLC